BMW N54 Twin Turbo Pair of Turbo Blankets
This pair of Forge turbo blankets are designed for the N54 BMW (1M, 135i, 335i) and designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components.
- Stainless Steel Rivets
- Stainless Steel Fasteners
- Carbon fabric Outer Shell
- Calcium Magnesium Silicate Wool constructed Inner Core
- High temperature silica fabric
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C
· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C
· Radiant Heat Limit: 2500°F/1371°C
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Safety Information
Toxicological and Ecological Information
Acute Toxicity: According to its composition, this product should not be harmful in normal conditions of use.
Local Effects:
- Inhalation: Possible irritation of respiratory system. At high temperatures, products of thermal decomposition can be irritating to respiratory system.
- Ingestion: Can be considered not harmful if swallowed.
- Skin Contact: Can be considered as non-irritating to skin. Contact with the product, when handled at high temperatures, cause serious burns. At high temperature, products of thermal decomposition can be irritating to skin.
- Eye Contact: Can be considered as non-irritating to eyes. Contact with the product, when handled at high temperatures, can cause serious burns. At high temperature, products of thermal decomposition can be irritating to eyes.
- Ecotoxicity: Inert material. Persistence and degradation: Not biodegradable on the base of its structure.
Other Information:
- The information given in this Material Safety Data Sheet is based on knowledge available at the time of compilation and is intended to describe the product only in terms of health and safety requirements. It does not signify any warranty with regard to specific properties or specifications. The present product is designed for general industrial use.
First Aid Measures:
Eye Contact: Remove particles remaining under the eyelids. Wash well open immediately, abundantly and thoroughly with water. If irritation persists, consult an ophthalmologist.
Skin Contact: Cool skin with cold water after contact with molten compound and remove product with vegetable oil or paraffin. In case of adhesion, do not try to remove the product. Treat the affected areas as thermal burns.
Inhalation: Dust inhalation, inhalation of vapours from heated products, inhalation of vapours due to thermal decomposition. Move to fresh air and in case of persistent problems consults a doctor.
Instructions
| Vehicle | Chassis | Years | Engine |
|---|---|---|---|
| 1 SeriesE82 2Dr Coupe1 Series > E82 2Dr Coupe 2007-2013 > 1M 2011-2012 (N54) | E82 | 2011–2012 | 1M (N54 |
| 1 SeriesE88 2Dr Convertible1 Series > E88 2Dr Convertible 2007-2013 > 135i 2007-2010 (N54) | E88 | 2007–2010 | 135i (N54 |
| 1M1M1M > 1M > E82 2dr Coupe 2011-2012 (N54) | E82 | 2011–2012 | E82 2dr Coupe (N54 |
| 3 SeriesE90/E91/E92/E93 Coupe/Convertible/Saloon/Estate3 Series > E90/E91/E92/E93 Coupe/Convertible/Saloon/Estate 2004-2013 > 335i 2006-2009 (N54) | E90 | 2006–2009 | 335i (N54 |